Fluorolon 1096 is a general- purpose material made for contact with shafts and housings; it is made for 300 series stainless steel. aluminum and other soft metallic or plastic materials. Fluorolon 1096 material has low abrasion resistance to mating parts. The material/s high PV (pressure-velocity) values make it suitable for sealing most media, including liquid, moisture, and gases, at high speeds and low pressures. Fluorolon 1096 is recommended for general service applications and may be used in food contact applications at temperatures from 1320 to +475° F ( – 196 °C to 246 °C ).

Chemical Compatibility
Fluorolon 1096 has excellent chemical compatibility. The material is compatible with most fluids and gases, but it is not recommended for use with sulfuric and nitric acids, alkali metals, chlorine fluoride, lithium, potassium and sodium at high temperatures.

FDA Compliance
Fluorolon 1096 is “ FDA compliant” for use in food contact.

Mechanical Properties
The mechanical properties of ALLOY 1055 at ambient temperatures are:
Tensile Strength             ASTM D638                  2100 psi ( 148 kg/cm2)
Elongation                   ASTM D638                  180%

Color
Light Green

Service Temperature Range ( F)
1200 to 350

Advantages of Flurolon 1096
– Low abrasion to soft materials
– High PV values in most liquid and air applications
– Material maintains its properties at high speeds

Other information
This information corresponds to our current information on the subject. It is offered solely yo provide suggestions for your own experimentation. It is not intended, however, to subtitule for any testing you may need to conduct to determine for yourself the suitability of our products for your particular purposes. Since we cannot anticipate all variations in actual end- use conditions, Advanced EMC Technologies makes no warranties.