phone-fax
Request Quote Button

Advanced EMC Technologies

FLUOROLON PEEK 3000

Peek is a high performance, high temperature engineering plastic. It is an excellent
material for a wide variety of applications where chemical, thermal and combustion properties are critical

APPLICATIONS:

Peek is ideal for pump bodies and manifolds for High Performance Liquid Chromatography (HPLC) equipment, medical device components, seats, electrical insulators.

Property
Specified
Units
Method

Tensile Strength
14,000
psi
ASTM D638

Elongation
5
%
ASTM D638

Tensile Modulus
507,000
psi
ASTM D638

Compressive Strength
17,000
psi
ASTM D695

Flexural Strength
24,600
psi
ASMT D790

Flexural Modulus
580,000
psi
ASTM D790

Notched Impact
1.6
ft/lb/in
ASTM D256

Hardness—Rockwell
99
M-Scale
ASTM D785

Coefficient of Friction
34

Service Temperature
500
(F)

Thermal Expansion
2.6 x 10`5th
um/m/c
ASTM D696

Wear Factor
k
K (in3/min/ft/lb/hr)

Specific Gravity
1.32
g/cm3
ASTM D792

Water Absorption
.5
24hours-%
ASTM D570

Dielectric
190
kv/cm
ASTM D149

Flammability
self-ext
ASTM D639

Resistance to oils, fuels, solvents
excellent

This information corresponds to our current information on the subject. It is offered solely to provide suggestions for your own experimentation. It is not intended, however, to substitute for any testing you may
need to conduct to determine for yourself the suitability of our products for your particular purposes. Since
we cannot anticipate all variations in actual end-use conditions, Advanced EMC Technologies makes no
warranties and assumes no liability in connection with any use of this information.