phone-fax
Request Quote Button

Advanced EMC Technologies

FLUOROLON PEEK 3005

Fluorolon 3005 is a 30% Glass Fiber reinforced PEEK it is a high performance, high temperature engineering plastic. It is an excellent material for a wide variety of applications
where chemical, thermal and combustion properties are critical.. This grades exhibits a
higher tensile and flexural modulus than Grade 3000 (unfilled) thus offering more resistance to deformation under load at elevated temperatures.

APPLICATIONS:

PEEK glass fiber is ideal for pump bodies, manifolds, valve plates etc.

Property
Specified
Units
Method

Tensile Strength
18,900
psi
ASTM D638

Elongation
2.5
%
ASTM D638

Tensile Modulus
1,600,000
psi
ASTM D638

Compressive Strength
20,000
psi
ASTM D695

Flexural Strength
28,200
psi
ASMT D790

Flexural Modulus
1,400,00
psi
ASTM D790

Notched Impact
1.55
ft/lb/in
ASTM D256

Hardness
90
Shore D
ASTM D785

Hardness
90
Shore D
ASTM D785

Coefficient of Friction
.39
dry v steel

Service Temperature
480
F
Max-no load

Thermal Expansion
14 10^6th
in/in/f
ASTM D696

Wear Factor
k
K (in3/min/ft/lb/hr)

Specific Gravity
1.51
g/cm3
ASTM D792

Water Absorption
.12
(%)24-hrs-73F
ASTM D570

Dielectric
175
ASTM D639

Resistance to oils, fuels, solvents
excellent

This information corresponds to our current information on the subject. It is offered solely to
provide suggestions for your own experimentation. It is not intended, however, to substitute for
any testing you may need to conduct to determine for yourself the suitability of our products for
your particular purposes. Since we cannot anticipate all variations in actual end-use conditions,
Advanced EMC Technologies makes no warranties and assumes no liability in connection with
any use of this information