phone-fax
Request Quote Button

Advanced EMC Technologies

FLUOROLON PEEK 3010

Fluorolon 3010 is a 30% Carbon Fiber reinforced PEEK (polyetheretherketone) polymer.
It is a performance polymer offering high modulus, high temperature service used in many
bearing and metal replacement applications. It is an excellent material for a wide variety of
applications where chemical, thermal, wear and combustion properties are critical.

APPLICATIONS:

Grade 3010 is ideal for pump bodies, manifolds, (HPLC) equipment, seats and bearings,
seals in valves and fluid handling equipment.

Property
Specified
Units
Method

Tensile Strength
31,000
psi
ASTM D638

Elongation
1.7
%
ASTM D638

Tensile Modulus
3,050,000
psi
ASTM D638

Compressive Strength
33,500
psi
ASTM D695

Flexural Strength
51,400
psi
ASMT D790

Flexural Modulus
2,292,000
psi
ASTM D790

Notched Impact
1.44
ft/lb/in
ASTM D256

Hardness
90
Shore-D
ASTM D785

Coefficient of Friction
.24
dry v steel

Service Temperature
480
F
Max-No Load

Thermal Expansion
25 x 10^6th
in/in/f
ASTM D696

Wear Factor
.000148
in/min/68F
600Ft/Min

Specific Gravity
1.41
g/cm3
ASTM D792

Water Absorption
.10
(%) 24-hrs-%
ASTM D570

Dielectric
190
kv/cm
ASTM D149

Flammability
self-ext
ASTM D639

Resistance to oils, fuels, solvents
excellent

This information corresponds to our current information on the subject. It is offered solely to provide suggestions for your own experimentation. It is not intended, however, to
substitute for any testing you may need to conduct to determine for yourself the suitability
of our products for your particular purposes. Since we cannot anticipate all variations in
actual end-use conditions, Advanced EMC Technologies makes no warranties and assumes
no liability in connection with any use of this information.