phone-fax
Request Quote Button

Advanced EMC Technologies

FLUOROLON PEEK 3015 BG

PEEK 3015 BG Carbon/PTFE/Graphite is a high performance, high temperature
polymer. It is an excellent material for a wide variety bearing applications offering
high load, low coefficient of friction for high temperature bearing applications

APPLICATIONS:

PEEK 3015 BG Carbon/PTFE/Graphite is designed for higher load bearing applications with medium to higher FPM.

Property
Specified
Units
Method

Tensile Strength
20,445
psi
ASTM D638

Elongation
2.5
%
ASTM D638

Tensile Modulus
psi
ASTM D638

Compressive Strength
21,750
psi
ASTM D695

Flexural Strength
30,450
psi
ASMT D790

Flexural Modulus
1,174,500
psi
ASTM D790

Notched Impact
1.16
ft/lb/in
ASTM D256

Hardness
90
shore-D
ASTM D785

Coefficient of Friction
.24
dry vs steel

Service Temperature
500
(F)

Thermal Expansion
1.2 x 10` 5th
in/in/F
ASTM D696

Wear Factor
k
K (in3/min/ft/lb/hr)

Specific Gravity
1.14
g/cm3
ASTM D792

Water Absorption
.06
24hours-%
ASTM D570

Dielectric
190
kv/cm
ASTM D149

Flammability
self – ext
ASTM D639

Resistance to oils, fuels, solvents
fair

This information corresponds to our current information on the subject. It is offered solely to provide suggestions for your own experimentation. It is not intended, however, to substitute for any
testing you may need to conduct to determine for yourself the suitability of our products for your
particular purposes. Since we cannot anticipate all variations in actual end-use conditions, Advanced
EMC Technologies makes no warranties and assumes no liability in connection with any use of this
information.