phone-fax
Request Quote Button

Advanced EMC Technologies

FLUOROLON POLYIMIDE 4001

Fluorolon 4001 is a un-filled polyimide for maximum physical and electrical properties and
This polymer provides outstanding mechanical strength and wear resistance up to 900
short term degrees F. This exceptional bearing material is suited for high load high PV
applicatons. Also good in dry gas or vacuum environments

APPLICATIONS:

Critical applications wear high temperature and high load bearings are required. This
material has excellent chemical resistance .

Property
Specified
Units
Method

Tensile Strength
12,500
psi
ASTM D638

Flexural Modulus
450,000
psi
ASTM D638

Tensile Elongation
7.5
%
ASTM D638

Compressive Strength
19,300
psi
ASTM D695

Flexural Strength
16,000
psi
ASMT D790

Limiting PV

Notched Impact
.8
ft/lb/in
ASTM D256

Hardness
E60

Coefficient of Friction
.29
Dynamic
dry vs steel

Service Temperature
500
F

Thermal Expansion
30 10^5th
in/in/f
ASTM D696

Wear Factor

Specific Gravity
1.43
g/cm3
ASTM D792

Water Absorption
.24
24 hours-%
ASTM D570

Dielectric Strength .125” Thick
560
V/Mil
ASTM D149

Flammability
V-0
ASTM D639

Resistance to oils, fuels, solvents
excellent

This information corresponds to our current information on the subject. It is offered solely to provide suggestions for your own experimentation. It is not intended, however, to substitute for any
testing you may need to conduct to determine for yourself the suitability of our products for your
particular purposes. Since we cannot anticipate all variations in actual end-use conditions, Advanced EMC Technologies makes no warranties and assumes no liability in connection with any
use of this information.