Fluorolon Virgin PTFE 1050 is reinforced ,15% Glass/ 5% Molybdenum Disulfide. The
improves the wear properties, reduces extrusion. The material has the ability to run under
dry or wet conditions making it an ideal bearing and seal material. The material is excellent
in dry gas applications.

APPLICATIONS:

Fluorolon 1050 is used primarily for high pressure seals, seats, bearings best in vacuum/
inert gas sealing not for use in rotary. Can be abrasive

MECHANICAL PROPERTIES:

Property
Specified
Units
Method
Specific Gravity
2.06
gr/cc
ASTM-D792
Tensile Strength
3200
psi
ASTM-D1708
Elongation
200%
%
ASTM-D1708
Flexual Modulus
245,000
%
ASTM-D790
Flexural Strength
2550
psi
ASTM-D790
Compressive Modulus
119,000
psi
ASTM-D695
Compressive Strength
1800
psi
ASTM-D695
Hardness
86
shore D
Coefficient of Thermal Expansion
39 10 x6th
in/in/deg.F
ASTM-D696
Water Absorption (24 hrs)
.007
%
ASTM-D570
Max. Service Temperature
500
F
Coefficient of Friction
.19
STM-D3702

This information corresponds to our current information on the subject. It is offered solely to provide suggestions for your own experimentation. It is not intended, however, to
substitute for any testing you may need to conduct to determine for yourself the suitability
of our products for your particular purposes. Since we cannot anticipate all variations in
actual end-use conditions, Advanced EMC Technologies makes no warranties and assumes
no liability in connection with any use of this information.